overview

Victron ORION-Tr SMART DC-DC Battery Charger 12/24-10 - Isolated - Built-in Bluetooth (ORI122424120)

Charges Lead Acid, AGM and Lithium Batteries

Bluetooth Smart enabled – Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.

Fully programmable

• Battery charge algorithm (configurable) or fixed output
• Smart alternator compatibility: engine running detection mechanism
  

Adaptive 3-stage charge algorithm: bulk – absorption – float

• For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.
• For lithium batteries absorption time is fixed, default 2 hours.
• Alternatively, a fixed output voltage can be chosen.
  

Suitable for use in vehicles with a smart alternator (Euro 5 and Euro 6 engines) – The built-in engine shutdown detection will stop the converter when the engine is not running. This prevents unwanted discharge of the starter battery (see manual for details).

Remote on-off - A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).

All models are short circuit proof and can be paralleled to increase output current – An unlimited number of units can be connected in parallel.

High temperature protected – The output current will reduce at high ambient temperature.

IP43 protection – When installed with the screw terminals oriented downwards.

Screw terminals – No special tools needed for installation.

Input fuse (not replaceable)

specification